Integration and Simulation Tests in Python

Leave a Comment / Development

One of my (many) tasks lately has been to rework unit and integration tests for Review Bot, our automated code review add-on for Review Board.

The challenge was providing a test suite that could test against real-world tools, but not require them. An ever-increasing list of compatible tools has threatened to become an ever-increasing burden on contributors. We wanted to solve that.

So here’s how we’re doing it.

First off, unit test tooling

First off, this is all Python code, which you can find on the Review Bot repository on GitHub.

We make heavy use of kgb, a package we’ve written to add function spies to Python unit tests. This goes far beyond Mock, allowing nearly any function to be spied on without having to be replaced. This module is a key component to our solution, given our codebase and our needs, but it’s an implementation detail — it isn’t a requirement for the overall approach.

Still, if you’re writing complex Python test suites, check out kgb.

Deciding on the test strategy

Review Bot can talk to many command line tools, which are used to perform checks and audits on code. Some are harder than others to install, or at least annoying to install.

We decided there’s two types of tests we need:

  1. Integration tests — ran against real command line tools
  2. Simulation tests — ran against simulated output/results that would normally come from a command line tool

Being that our goal is to ease contribution, we have to keep in mind that we can’t err too far on that side at the expense of a reliable test suite.

We decided to make these the same tests.

The strategy, therefore, would be this:

  1. Each test would contain common logic for integration and simulation tests. A test would set up state, perform the tool run, and then check results.
  2. Integration tests would build upon this by checking dependencies and applying configuration before the test run.
  3. Simulation tests would be passed fake output or setup data needed to simulate that tool.

This would be done without any code duplication between integration or simulation tests. There would be only one test function per expectation (e.g., a successful result or the handling of an error). We don’t want to worry about tests getting out of sync.

Regression in our code? Both types of tests should catch it.

Regression or change in behavior in an integrated tool? Any fixes we apply would update or build upon the simulation.

Regression in the simulation? Something went wrong, and we caught it early without having to run the integration test.

Making this all happen

We introduced three core testing components:

  1. @integration_test() — a decorator that defines and provides dependencies and input for an integration test
  2. @simulation_test() — a decorator that defines and provides output and results for a simulation test
  3. ToolTestCaseMetaClass — a metaclass that ties it all together

Any test class that needs to run integration and simulation tests will use ToolTestCaseMetaClass and then apply either or both @integration_test/@simulation_test decorators to the necessary test functions.

When a decorator is applied, the test function is opted into that type of test. Data can be passed into the decorator, which is then passed into the parent test class’s setup_integration_test() or setup_simulation_test().

These can do whatever they need to set up that particular type of test. For example:

  • Integration test setup defaults to checking dependencies, skipping a test if not met.
  • Simulation test setup may write some files or spy on a subprocess.Popen() call to fake output.


For example:

class MyTests(kgb.SpyAgency, TestCase,
              metaclass=ToolTestCaseMetaClass):
    def setup_simulation_test(self, output):
        self.spy_on(execute, op=kgb.SpyOpReturn(output))

    def setup_integration_test(self, exe_deps):
        if not are_deps_found(exe_deps):
            raise SkipTest('Missing one or more dependencies')

    @integration_test(exe_deps=['mytool'])
    @simulation_test(output=(
        b'MyTool 1.2.3\n'
        b'Scanning code...\n'
        b'0 errors, 0 warnings, 1 file(s) checked\n'
    ))
    def test_execute(self):
        """Testing MyTool.execute"""
        ...

When applied, ToolTestCaseMetaClass will loop through each of the test_*() functions with these decorators applied and split them up:

  • Test functions with @integration_test will be split out into a test_integration_<name>() function, with a [integration test] suffix appended to the docstring.
  • Test functions with @simulation_test will be split out into test_simulation_<name>(), with a [simulation test] suffix appended.

The above code ends up being equivalent to:

class MyTests(kgb.SpyAgency, TestCase):
    def setup_simulation_test(self, output):
        self.spy_on(execute, op=kgb.SpyOpReturn(output))

    def setup_integration_test(self, exe_deps):
        if not are_deps_found(exe_deps):
            raise SkipTest('Missing one or more dependencies')

    def test_integration_execute(self):
        """Testing MyTool.execute [integration test]"""
        self.setup_integration_test(exe_deps=['mytool'])
        self._test_common_execute()

    def test_simulation_execute(self):
        """Testing MyTool.execute [simulation test]"""
        self.setup_simulation_test(output=(
            b'MyTool 1.2.3\n'
            b'Scanning code...\n'
            b'0 errors, 0 warnings, 1 file(s) checked\n'
        ))
        self._test_common_execute()

    def _test_common_execute(self):
        ...

Pretty similar, but less to maintain in the end, especially as tests pile up.

And when we run it, we get something like:

Testing MyTool.execute [integration test] ... ok
Testing MyTool.execute [simulation test] ... ok

...

Or, you know, with a horrible, messy error.

Iterating on tests

It’s become really easy to maintain and run these tests.

We can now start by writing the integration test, modify the code to log any data that might be produced by the command line tool, and then fake-fail the test to see that output.

class MyTests(kgb.SpyAgency, TestCase,
              metaclass=ToolTestCaseMetaClass):
    ...

    @integration_test(exe_deps=['mytool'])
    def test_process_results(self):
        """Testing MyTool.process_results"""
        self.setup_files({
            'filename': 'test.c',
            'content': b'int main() {return "test";}\n',
        })

        tool = MyTool()
        payload = tool.run(files=['test.c'])

        # XXX
        print(repr(payload))

        results = MyTool().process_results(payload)

        self.assertEqual(results, {
            ...
        })

        # XXX Fake-fail the test
        assert False

I can run that and get the results I’ve printed:

======================================================================
ERROR: Testing MyTool.process_results [integration test]
----------------------------------------------------------------------
Traceback (most recent call last):
    ...
-------------------- >> begin captured stdout << ---------------------
{"errors": [{"code": 123, "column": 13, "filename": "test.c", "line': 1, "message": "Expected return type: int"}]}

Now that I have that, and I know it’s all working right, I can feed that output into the simulation test and clean things up:

class MyTests(kgb.SpyAgency, TestCase,
              metaclass=ToolTestCaseMetaClass):
    ...

    @integration_test(exe_deps=['mytool'])
    @simulation_test(output=json.dumps(
        'errors': [
            {
                'filename': 'test.c',
                'code': 123,
                'line': 1,
                'column': 13,
                'message': 'Expected return type: int',
            },
        ]
    ).encode('utf-8'))
    def test_process_results(self):
        """Testing MyTool.process_results"""
        self.setup_files({
            'filename': 'test.c',
            'content': b'int main() {return "test";}\n',
        })

        tool = MyTool()
        payload = tool.run(files=['test.c'])
        results = MyTool().process_results(payload)

        self.assertEqual(results, {
            ...
        })

Once it’s running correctly in both tests, our job is done.

From then on, anyone working on this code can just simply run the test suite and make sure their change hasn’t broken any simulation tests. If it has, and it wasn’t intentional, they’ll have a great starting point in diagnosing their issue, without having to install anything.

Anything that passes simulation tests can be considered a valid contribution. We can then test against the real tools ourselves before landing a change.

Development is made simpler, and there’s no worry about regressions.

Going forward

We’re planning to apply this same approach to both Review Board and RBTools. Both currently require contributors to install a handful of command line tools or optional Python modules to make sure they haven’t broken anything, and that’s a bottleneck.

In the future, we’re looking at making use of python-nose‘s attrib plugin, tagging integration and simulation tests and making it trivially easy to run just the suites you want.

We’re also considering pulling out the metaclass and decorators into a small, reusable Python packaging, making it easy for others to make use of this pattern.